Enter your search terms
Submit search form
Web
examineonline.googlepages.com
Online Exam
>>
COMPTIA
>>
A+ Core
>>
Test 6
Menu
Programming
COMPTIA
GMAT
English
IQ
DataBase
OS
MCSE
CISCO
Finance
Management
Health
Soft Skills
Web Building
Multimedia
Test 6
1 . You have just installed a new internal PCI modem in your desktop. It will not dial out. What is the problem?
A.
The phone line is plugged in to the line-in port on the modem card.
B.
The modem has not been set up in control panel properties
C.
The phone line out of the wall is plugged into the phone port on the modem card
D.
The port speed is set too high
2 . The resolution on a new 19" ULTRA VGA monitor was set to 640 x 480 16 colors. You change the resolution to 800x600 High color 16-bit. But the monitor goes blank. What could be the problem?
A.
The monitor trapezoid setting is wrapped
B.
The video card is using an IRQ
C.
The video card is not installed properly
D.
The refresh rate is too fast for the monitor
3 . When seeking to upgrade your BIOS for a particular motherboard. What do you need to know?
A.
DIMM manufacturer
B.
Hard Drive Size
C.
Memory Type
D.
Make and Model
4 . You just installed a new IDE hard drive but your system BIOS will not recognize the new drive. What should you check first?
A.
Cable sequence
B.
Jumpers on the hard Drive
C.
Hard Drive manufacturer Website information
D.
Drivers that need to be loaded
5 . What causes chip creep?
A.
Chips memory that is incompatible with the motherboard
B.
Thermal expansion and contraction
C.
Chips that don't communicate with other chips
D.
Overheating of chips due to electrical shorts
6 . What would a Multimeter be used to measure?
A.
Floppy drive speed
B.
Power-supply voltage
C.
RAID controller synchronization
D.
CD-ROM data
7 . All of the following voltage/current combinations should be considered dangerous but which of these combinations is the most likely to cause serious injury or death?
A.
240 volts and DC at 10milli amperes
B.
120 Volts DC at 500 Amperes.
C.
12 volts DC at 200milli ampere
D.
5 volts DC at 100milli amperes.
8 . What is your first action when windows report that your hard drive is developing bad sectors?
A.
Run Scan Disk with the thorough option
B.
Run Secclean from DOS
C.
Run the defrag utility on the hard Drive
D.
Replace the hard drive
9 . Which device should not be plugged into a standard UPS?
A.
An inkjet printer
B.
Laser printer
C.
External Modem
D.
Any monitor
10 . How many devices does USB support?
A.
256
B.
32
C.
64
D.
127
11 . What could cause a larger capacity drive to format at lower capacity when you install it in an existing system?
A.
The BIOS cannot handle the larger capacity drive and formats at the highest recognizable capacity
B.
The disk repository is full
C.
The ram does not support the larger capacity hard drives
D.
The new drive in not y2k compatible
12 . You get a CMOS Checksum error during boot up. What is the most likely cause?
A.
BIOS needs Updating
B.
Power Supply is bad
C.
CMOS battery is nearing end of life
D.
Hard Drive types are incorrectly defined
13 . Which type of field replaceable unit is a SCSI host adapter?
A.
CPU
B.
I/O card
C.
Hard Drive
D.
Video Card
14 . Which is the fastest speed?
A.
2 ns
B.
50 ns
C.
20 ns
D.
100 ns
15 . A customer calls and says that her computer will not boot. She can hear noises and see lights on the box but nothing comes on the screen. What should you take to the site to fix the problem?
A.
Hard Drive
B.
Video Card
C.
Power Supply
D.
Power Cable
Test Name :
Test 6
Category :
A+ Core
Number of Question :
15
Pass Score :
80
Test Result
Your Score :
Passing Score :
80
Result :
Copyright by
VanTuMinh
© 2007
