Enter your search terms
Submit search form
Web
examineonline.googlepages.com
Online Exam
>>
MCSE
>>
Win2K Pro
>>
Test 3
Menu
Programming
COMPTIA
GMAT
English
IQ
DataBase
OS
MCSE
CISCO
Finance
Management
Health
Soft Skills
Web Building
Multimedia
Test 3
1 . You are the administrator of a network supporting Windows 2000 Professional computers. A user calls you to report that she has difficulty holding down two or more keys at the same time. Which option should you instruct the user to enable?
A.
ToggleKeys
B.
FilterKeys
C.
SerialKeys
D.
StickyKeys
2 . You are creating a small network consisting of seven Windows 2000 Professional computers. All computers on the network connect to a 10/100 hub using UTP category 5 network cable. On Computer1 and Computer2 you install UTP network adapter cards rated at 100 Mbps. On the other five computers you install UTP/BNC combo network adapters. After installing Windows 2000 Professional on all seven computers, you discover that only computers 1 and 2 have network connectivity. What should you do to enable the other five computers to access network resources?
A.
Configure the hub to only operate at 10 Mbps speed
B.
Configure the combo network adapters to only use the BNC port
C.
Configure the combo network adapters to only use the UTP port
D.
Configure the hub to only operate at 100 Mbps speed
3 . You are the administrator of a Windows 2000 Professional computer with a PCI display adapter. You install another PCI display adapter. After restarting, the secondary monitor performs a POST, and only the secondary monitor is listed in the Display Properties. Which two methods are recommended for resolving this problem? (Choose two.)
A.
Set the BIOS option to run the POST routine on the display port corresponding to the VGA device
B.
Ensure that VGA is disabled on the primary adapter display
C.
Switch PCI slots between the two adapters
D.
Replace the display driver
4 . You are the administrator of a Windows 2000 network. You are preparing to upgrade a computer running Windows NT Workstation 4.0 to Windows 2000 Professional. What must you do?
A.
Run Chkdsk
B.
Install Service Pack 5
C.
Remove all antivirus software
D.
Disable disk compression
5 . You are the administrator of a network supporting Windows 2000 computers. You want to upgrade a computer running Windows NT Workstation 4.0 to Windows 2000 Professional. Which method can you use to upgrade?
A.
Boot using the four boot floppy disks
B.
Start Windows NT Workstation 4.0 and run Winnt.exe
C.
Start Windows NT Workstation 4.0 and run Winnt32.exe
D.
Boot from the Windows 2000 Professional CD
6 . You are the administrator of a domain supporting Windows 2000 Professional computers. You want to implement a smart card logon process. Which protocol should you use?
A.
PAP
B.
SPAP
C.
CHAP
D.
MS-CHAP
7 . You are the administrator of a Windows 2000 Professional computer with two processors. You want to improve the performance of a process by assigning it to a single processor. What should you do?
A.
Use a registry editor
B.
Click Set Affinity in Device Manager
C.
Windows 2000 Professional does not support this configuration
D.
Click Set Affinity in Task Manager
8 . You are the administrator of a workgroup supporting Windows 2000 Professional computers.
You configure the Group Policy by setting the Account lockout duration to 0. What effect will this have?
A.
Users will be locked out for 69 days
B.
Users will be locked out after one failed logon attempt
C.
Users will never be locked out
D.
Users will be locked out indefinitely until the Administrator unlocks the user account
9 . You are the administrator of a computer running Windows 2000 Professional. You want to use Windows Backup at the end of the day to back up all files that change in the \Sales folder during the day. Which backup type should you use?
A.
Copy
B.
Normal
C.
Daily
D.
Incremental
10 . You are the administrator of a Windows 2000 Professional computer with a fax modem. You want to provide different billing codes to support faxes sent by different users. What should you do?
A.
Assign the Print fax permission in the Everyone group
B.
Create a different printer for each billing code
C.
Create multiple billing codes for a single fax printer
D.
Purchase a third-party fax management solution
11 . You are the administrator of your company's network. The user of a Windows 2000 Professional computer is unable to connect to a network printer using a Web browser. What should you do to allow the user to connect to the printer?
A.
Go to the user's computer and use the Add Printer wizard to connect to the network printer
B.
Assign the user the Print permission to the printer
C.
Use the Search function
D.
Using the Indexing Service
12 . You are the administrator of a Windows 2000 Professional computer with one Pentium II processor. You want to upgrade the computer to support two processors. You install both processors. What else should you do?
A.
No action is required
B.
Upgrade the computer driver using the Device Manager
C.
Upgrade the computer driver using the Hardware Wizard
D.
Open the Device Manager and choose Scan for hardware changes from the Action menu
13 . The \Sales folder is a compressed folder on an NTFS partition. You want to move the \Sales folder from your Windows 2000 Professional computer to another NTFS volume that does not have any compressed folders. You want the \Sales folder to remain compressed after it is moved. What should you do?
A.
Uncompress the source folder, compress the target folder, and move the folder
B.
Move the folder
C.
Compress the target folder, and move the folder
D.
Apply compression to each file in the \Sales folder, and move the folder
14 . You install a device driver on your Windows 2000 Professional computer. When you restart the system, Windows fails to start. You restart the system again, and again Windows fails to start. You suspect that the driver is causing the problem. What should you do to resolve this problem? (Choose 3.)
A.
Choose the Repair option
B.
Start the Recovery Console
C.
Insert the Emergency Repair Disk
D.
Start the computer from the Windows 2000 Professional CD
15 . You use a Windows Installer package to install Microsoft Word 2000 on 70 Windows 2000 Professional computers in the Engineering organizational unit (OU). Users in the Engineering OU report they cannot use Word custom templates. What should you do to make the custom templates available to users in the Engineering OU?
A.
Create a transform to install the custom templates
B.
Place the templates in a separate Windows Installer package, and publish both the application and the template package to the Engineering OU
C.
Reinstall the entire application
D.
Place the templates in a separate Windows Installer package, and assign the package to the Engineering OU
16 . You are the administrator of a network supporting Windows 2000 Professional computers. A user calls you to report that he has difficulty using the mouse because he is accustomed to using only a keyboard. Which accessibility option should you instruct the user to enable?
A.
SerialKeys
B.
ToggleKeys
C.
MouseKeys
D.
FilterKeys
17 . You are the administrator of a workgroup supporting computers running Windows 2000 Professional and Windows NT 4.0. You upgrade a Windows NT Workstation 4.0 computer to Windows 2000 Professional. You want to apply the Windows 2000 default security settings that are applied to clean-installed computers. Which security template type should you use?
A.
High Secure
B.
Basic
C.
Compatible
D.
Secure
18 . You are the administrator of your company's network. You want to use Windows Installer to deploy software applications on computers running Windows 2000 Professional. The software should appear as though it has been installed, but should not actually be installed until users attempt to run the application. You also want to ensure that only authorized users can run the application. How should you configure the package? (Choose two.)
A.
Publish the application to the users
B.
Assign the application to the users
C.
Remove the Assign Group Policy permission for the Authenticated User group
D.
Deny the Assign Group Policy permission for the Authenticated User group
19 . You are hosting a Web server on your home network and want to create a Web folder. What should you do?
A.
Open the Computer Management console, and double-click the Disk Management node
B.
Open My Computer, and double-click Add Network Place
C.
Open the Computer Management console, and double-click the Logical Drives node
D.
Open My Network Places, and double-click Add Network Place
20 . You are the administrator of a network supporting computers running Windows 95, Windows 98, Windows NT 4.0, and Windows 2000 computers. You want to host an Internet printer on your Windows 2000 Professional computer. What should you do? (Choose two.)
A.
Install Peer Web Services on your computer
B.
Advice Internet printing clients to use Internet Explorer 5.0 or higher
C.
Install Internet Information Services on your computer
D.
Advise Internet printing clients to use Internet Explorer 4.0 or higher
21 . You are the administrator of a Windows 2000 Professional computer. You install a device on the computer, but Windows does not install and configure the device properly. The Device Manager reports "This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)". Which two methods can you use to resolve this problem? (Choose two.)
A.
Restart the computer
B.
Manually assign resources to the device
C.
Remove any unneeded ISA devices
D.
Update the system BIOS
22 . You are the administrator of a Windows 2000 Professional computer. Which interfaces can be used to update the mouse driver? (Choose two.)
A.
Hardware Wizard
B.
Device Manager
C.
Mouse icon in Control Panel
D.
Recovery console
23 . Your Windows 2000 Professional computer has no built-in IrDA hardware. You want to use an external wireless adapter with your computer. What should you do? (Choose 2.)
A.
Open the Device Manager and choose Scan for hardware changes from the Action menu
B.
Reconfigure a serial port as infrared
C.
Use the Add/Remove Hardware wizard to install the device
D.
Attach a serial IrDA transceiver to a serial Com port
24 . You want to connect to an Internet printer named HP_laser. The printer is attached to a print server named Server1 and is shared under the Resource share. Which syntax should you use?
A.
http://printers/Server1/Resource/.HP_laser
B.
http://server1/Printers/Resource/.HP_laser
C.
http://server1//.HP_laser/Resource
D.
http://server1//Resource/.HP_laser
25 . You are the administrator of your company's network. You want to set up a print server to support client computers running these operating systems:
Windows 2000
Macintosh
NetWare
UNIX
Your proposed solution is to configure a computer running Windows 2000 Professional as a print server. Which clients computers will this configuration support? (Choose all that apply.)
A.
UNIX
B.
NetWare
C.
Windows 2000
D.
Macintosh
Test Name :
Test 3
Category :
Win2K Pro
Number of Question :
25
Pass Score :
80
Test Result
Your Score :
Passing Score :
80
Result :
Copyright by
VanTuMinh
© 2007
