MCSE,Win2K Pro,Test 4

Online Exam >> MCSE >> Win2K Pro >> Test 4

1 . Using a Sysprep image, you want to install unsigned drivers using the Sysprep mini-wizard. You want to minimize the time required for the Sysprep mini-wizard to run. What should you do?

A.Set the driver signing policy to Ignore

B.Use the -q switch when you create your master image

C.Create your master image with the devices that require manufacturer-supplied drivers

D.Use the -pnp switch when you create your master image

2 . You are installing Windows 2000 Professional from the local CD-ROM drive on a Pentium III computer. An error occurs, and Windows 2000 will not start. What is the first recommended troubleshooting procedure?

A.Boot from the Windows 2000 floppy disks

B.Boot from the Windows 2000 CD

C.Start the computer using the Last Known Good Configuration

D.Start the computer in safe mode

3 . You are the administrator of a domain supporting Windows 2000 computers. You implement IPSec. What effect does this have ?

A.Unauthorized users cannot log on to the network using a Guest account

B.Unauthorized users cannot steal information being transmitted over the local network

C.Only members of the Administrators group can use the network

D.Only members of the Administrators and Backup Operators groups can use the network

4 . You are the administrator of your company's network . You want to perform an unattended installation of Windows 2000 Professional on 50 computers. Of the 50 computers, 25 of them have network interface cards with a PXE boot ROM, while the other 25 do not have a PXE boot ROM. At minimal cost, how can you perform an unattended installation on the computers without a PXE boot ROM? (Choose two.)

A.Create a remote installation boot disk

B.Assign the user right "Log on as a service" to the Administrators group

C.Replace the network interface cards with adapters containing a PXE boot ROM and BIOS support for starting from the PXE boot ROM

D.Assign the user right "Log on as a batch job" to the Administrators group

5 . You are the administrator of a Windows 2000 Professional computer. You want to set a default billing code for a fax printer. Which methods can you use? (Choose two.)

A.Open the Fax icon in Control Panel, access the Advanced Options tab, open the Fax Sercvice Management Console, and access the fax device properties

B.Open the Printers folder, select the fax printer, and choose Printing Preferences from the File menu

C.From the Start menu, click Programs, Accessories, Communications, Fax, and then click Send Cover Page Fax to open the Send Fax wizard

D.Open the Printers folder, select the fax printer and choose Properties from the File menu

6 . You are the administrator of a network supporting Windows 2000 Professional computers. A user makes changes to his user profile, and then logs off. The next day the user logs on again and finds that all changes to his user profile have been lost. No error messages are displayed. What should you do to allow the user to save changes to his user profile ?

A.Add the user to the local Users group

B.Delete the default user profile, and restart the computer

C.Reinstall Windows 2000 Professional

D.Add the user to the local Administrators group

7 . You are the administrator of a Windows 2000 Professional computer with a PCI display adapter. You install another PCI display adapter. After installing the secondary monitor, the system does not complete the POST routine, and there is no display on either monitor. What should you do to resolve this problem?

A.Verify that the secondary display adapter is in PCI slot 2

B.Verify that the primary display adapter is in PCI slot 1.

C.Verify that the primary display adapter is in PCI slot 2.

D.Verify that the secondary display adapter is in PCI slot 1.

8 . You are an administrator of a network supporting Windows 2000 computers and UNIX systems running MIT Kerberos version 5. Which encryption types can UNIX systems use to authenticate to a Windows 2000 KDC server? (Choose two.)

A.DES-CBC-CRC

B.DES

C.DES-CBC-MD5

D.3DES

9 . You are installing Windows 2000 Professional and various software applications on 70 new computers using RIS. The installations are successful on all but one computer. What should you do to complete the installation on the failed computer?

A.Stop and restart the Listsvc

B.Stop and restart the BINLSVC

C.Stop and restart the Net Logon service

D.Stop and restart the Computer Browser service

10 . You are the administrator of your company's network. You attempt to deploy a Windows Installer-based application using a Windows Installer package, but the installation package does not install correctly. What is the first recommended troubleshooting method?

A.Check the Event Viewer Security Log.

B.Check the Event Viewer Application Log.

C.Repair the installation package using the repair option of Windows Installer.

D.Delete the package, recreate the package, and apply the appropriate modification.

11 . You are the administrator of your company's network supporting client computers running Windows 98, Windows NT 4.0, and Windows 2000. A computer running Windows 2000 Professional has a 10 GB hard disk drive installed as drive C: formatted with the FAT32 file system. You want to convert the volume to NTFS. What should you do?

A.Use the Disk Management node of the Computer Management console.

B.At a command prompt, type:
Convert C: /FS:NTFS /V

C.Use the Logical Drives node of the Computer Management console.

D.At a command prompt, type:
Convert C: /NTFS /V

12 . You are the administrator of a workgroup supporting Windows 2000 Professional computers. You want to apply a security template that blocks the installation of unsigned drivers. Which security template type should you use ?

A.Secure

B.Basic

C.Compatible

D.High Secure

13 . You are the administrator of NT5Pro1, a computer running Windows 2000 Professional. Printer1 is a shared color print device attached to NT5Pro1, and its print queue has three waiting jobs. The print device is not responding, and you want the three waiting print jobs to print to Printer2, another identical print device, on NT5Pro2, another Windows 2000 Professional computer. You also want to allow users who normally connect to Printer1 to have their print jobs redirected to Printer2. What should you do ?

A.Instruct users to print to a file named Printer2

B.Add a port to Printer2 mapped to \\NT5Pro1\Printer1

C.Configure a printing pool

D.Add a port to Printer1 mapped to \\NT5Pro2\Printer2

14 . You are the administrator of your company's network supporting Windows NT/2000 computers on three subnets. Microsoft Systems Management Server (SMS) 2.0 is used on the network. You want to use Network Monitor to monitor network traffic on a remote subnet. On which computers can you remotely monitor network traffic?

A.Windows 98

B.Windows NT 4.0

C.Windows 2000

D.Windows 95

15 . You are the administrator of a Windows 2000 Professional computer in a Windows 2000 domain. You attempt to copy an encrypted file in a folder on your local computer to a remote computer. The process fails. What should you do to resolve this problem?

A.Disable the user rights assignment policy Replace a process-level token

B.Enable the user rights assignment policy Enable computer and user accounts to be trusted for delegation.

C.Disable the user rights assignment policy Enable computer and user accounts to be trusted for delegation.

D.Enable the user rights assignment policy Replace a process-level token.

16 . You have some compressed bitmap files in a directory of your Windows 2000 Professional computer. The file compression has reduced their size from 2 MB to 1 MB. You attempt to copy them to a floppy disk, but an error reports that the destination drive is full. How can you copy the bitmap files to a 1.44 MB floppy disk?

A.Format the floppy disk as FAT, and restart the copy operation.

B.Format the floppy disk as NTFS, and restart the copy operation.

C.Create an empty compressed folder on the floppy disk, and copy the files to the new folder.

D.Use a third-party file compression utility to create a compressed archive containing the bitmap files. Copy the compressed archive to the floppy disk.

17 . You are the administrator of a domain supporting Windows 2000 Professional computers. You want to use IPSec with a proxy server. How should you configure the Internet interface of your proxy server to ensure that packets secured with IPSec are not rejected? (Choose three.)

A.Define input and output filters using UDP port 500 (0x1F4) for ISAKMP/Oakley negotiation traffic.

B.Define input and output filters using IP Protocol ID 50 (0x32) for IPSec Encapsulating Security Protocol traffic.

C.Define input and output filters using IP Protocol ID 52 (0x34) for IPSec Encapsulating Security Protocol traffic.

D.Define input and output filters using IP Protocol ID 51 (0x33) for IPSec Authentication Header traffic.

18 . You are the administrator of your company's network. You want to use Windows Installer to deploy an application on computers running Windows 2000. You do not want any application shortcuts to be visible on the desktop or Start menu, but users should be able to install the application by opening a file associated with the application. How should you configure the package?

A.Assign applications to computers

B.Publish the application to the users

C.Publish applications to computers

D.Assign the application to the users

19 . You administer a Windows 2000 Professional computer that has a Pentium II 400 MHz processor, an E-IDE hard drive, and 64 MB of RAM. You run graphics-intensive applications on the computer to create advertisements for Web pages. The computer performance does not seem to be optimal, so you use System Monitor in the Performance console to monitor counters for disk, memory, paging file and processor.
System Monitor shows that Memory: Pages/sec is consistently below 50, Paging File: %Usage is consistently 30, PhysicalDisk: %Disk Time is consistently below 30, and Processor: %Processor Time is consistently between 90 and 100.
Based on this performance data, what should you do to optimize the computer performance?

A.Add a second processor

B.Add more RAM

C.Upgrade the disk to a SCSI model

D.Upgrade the BIOS

20 . You want to configure your computer as a multiple-boot system so that you can run MS-DOS, Windows NT Workstation 4.0, Windows 98, and Windows 2000 Professional. In which order should you install these operating systems?

A.Windows 98, Windows NT, MS-DOS, and Windows 2000 Professional

B.Windows 98, MS-DOS, Windows NT, and Windows 2000 Professional

C.Windows 98, Windows NT, Windows 2000 Professional, and MS-DOS

D.MS-DOS, Windows 98, Windows NT, and Windows 2000 Professional

21 . You are the administrator of a network supporting Windows 2000 Professional computers. All computers on the network use NTFS volumes. What is the minimum permission must a user have to a folder in order to share it?

A.List Folder Contents

B.Read

C.Modify

D.Full Control

22 . You are the administrator of a Windows 2000 Professional computer with a built-in 33-Kbps modem. You install a 56-Kbps ISA modem, but the new modem does not function correctly. How can you use the 56-Kbps modem?

A.Install the 56 Kbps modem in a different slot

B.Disable the built-in modem using Device Manager

C.Remove the 56 Kbps modem using the Device Manager

D.Remote the built-in modem using Device Manager

23 . You bring your portable computer running Windows 2000 Professional on a commercial airline flight. The flight attendant instructs you to turn off your computer. In which state must your computer be in order to comply with airline safety rules?

A.Hibernate

B.Logged off

C.Stand by

D.Shut down

24 . You are the administrator of a Windows 2000 Professional computer. You attempt to create a new desktop item using the Content Definition File (CDF) format on the active desktop by directly typing the URL path. You receive this error message:
"Active Desktop Item. The control panel is unable to process this Content Definition File (CDF)."
What should you do to resolve this problem?

A.Configure Internet Explorer to work online

B.Disable the user tracking Group Policy setting

C.Configure Internet Explorer to work offline

D.Disable Active Desktop

25 . You are the administrator of a Windows 2000 Professional computer. You install an analog non-Plug and Play modem, and Windows 2000 Professional does not detect the modem. Which procedures can you use to install the modem and ensure that its manufacturer-specific features are available? (Choose two.)

A.Install the modem as a standard modem using the Install New Modem wizard

B.Download and install a .inf file designed for Windows 2000 from the modem manufacturer

C.Use the Add/Remove Hardware wizard to reinstall the modem

D.Open the Device Manager and choose Scan for hardware changes from the Action menu to reinstall the modem

Test Name :	Test 4
Category :	Win2K Pro
Number of Question :	25
Pass Score :	80

Test Result

Your Score :
Passing Score :	80

Result :

Menu

Test 4