Enter your search terms
Submit search form
Web
examineonline.googlepages.com
Online Exam
>>
MCSE
>>
Win2k Server
>>
Test 5
Menu
Programming
COMPTIA
GMAT
English
IQ
DataBase
OS
MCSE
CISCO
Finance
Management
Health
Soft Skills
Web Building
Multimedia
Test 5
1 . You are the administrator for a Windows 2000 network with Remote Access, Active Directory, and Group Policies configured. The network consists of 10 Windows 2000 Server computers and 500 Windows 2000 Professional client computers.
You have been instructed to completely secure the network. You want to centrally apply the security levels that are required to protect the enterprise systems. What must you access to apply the settings?
A.
Security Configuration and Analysis snap-in
B.
Active Directory Sites and Services snap-in
C.
Active Directory Domains and Trusts snap-in
D.
Group Policy snap-in
2 . You attempt to install Windows 2000 server on a Pentium III 550 MHz computer with a bootable CD-ROM and a bootable CD-RW drive and you receive a media error. You have received this error on the bootable CD-ROM drive on three attempts. You then change the CMOS settings so the CD-RW drive is the first place the computer looks for initialization files. However, you also receive a media error when attempting to install Windows 2000 on the computer. Both drives are on the Hardware Compatibility List (HCL) for Windows 2000. How should you proceed?
A.
Verify all hardware is properly detected and on the HCL
B.
Ensure the target partition has sufficient free space for the Windows 2000 server installation
C.
Contact Microsoft and request a Windows 2000 server replacement CD
D.
Verify the proper domain name is used during the installation
3 . After the installation of Windows 2000 Server, the server fails to start and you receive a blue screen error. How can you resolve this error?
A.
Increase the amount of memory in the server
B.
Create enough free space for the Windows 2000 Server installation on the target partition
C.
Replace the CD-ROM drive with one that is on the Windows 2000 Hardware Compatibility List
D.
Verify all hardware is properly detected an on the HCL
4 . As the network administrator of a Windows 2000 network, you must optimize disk space on a domain controller. The domain controller has a 6-GB SCSI hard drive in it that is a single NTFS partition. You must compress all archive information that is in the C:\Archive folder. How can you compress the folder?
A.
Right-click on the folder, select Properties, select Advanced from the General Tab, and ensure the "Encrypt contents to secure data" selection box is selected.
B.
Right-click on the folder, select Properties, select Advanced from the General Tab, and ensure the "Folder is ready for Archiving" box is selected.
C.
Right-click on the folder, select Properties, select Advanced from the General Tab, and ensure the "For faster searching allow Indexing Service to Index the folder" box is selected.
D.
Right-click on the folder, select Properties, select Advanced from the General Tab, and ensure the "Compress contents to save disk space" selection box is selected.
5 . Your company has recently hired you to be the Windows 2000 network administrator. The network uses a DHCP server and Terminal Services.
You must install a new network card in one of the Windows 2000 Server computers. You must then configure properties and settings after the installation of the device and the device drivers.
What is the best way to accomplish this task?
A.
Use the Installation CD
B.
Allow Windows 2000 to configure the settings
C.
Manually configure the settings
D.
Copy the settings from another network adapter
6 . You must implement a 1000-node network. The network will consist of four Windows 2000 domain controllers, two Windows 2000 servers, 3 Hewlett Packard 5SI printers, and 995 Windows 2000 Professional workstations. Your company has been assigned an IP address of 136.18.32.0. You expect the network to double in size to approximately 8 subnets with 250 nodes per subnet in the next two years. How should you configure the IP addressing structure to allow for this configuration so that no single subnet can have more than 300 nodes, but can accommodate at least 250 nodes?
A.
136.18.32.0/24
B.
136.18.32.0/20
C.
136.18.32.0/26
D.
136.18.32.0/22
7 . You have two disks in your Windows 2000 server. You must protect the system partition by creating an exact duplicate of it so if one of the hard drives fails, the system information is still protected. How should you configure the computer's hard disks?
A.
As a RAID level 1 configuration
B.
As a spanned volume
C.
As a striped set
D.
As a RAID level 5 configuration
8 . As the network administrator, you must run a processor intensive report every afternoon before closing. You receive many complaints from network users about the network slowing down dramatically during the time this report runs. You must still run the report locally on the Windows 2000 server, but you must minimize the effect on the processor. How can you achieve this functionality?
A.
Use the Processes tab of Task Manager and set the priority of the process running the report to Low
B.
Use the Performance tab of Task Manager and set the priority of the process running the report to Low.
C.
Use the Processes tab of Task Manager and set the priority of the process running the report to Realtime.
D.
Run the application that creates the report with the /BelowNormal switch from the Run line
9 . You are configuring Group Policy for your Windows 2000 network. The network uses only Windows 2000 Server computers and Windows 2000 Professional client computers.
You want to create a group policy. You want the policy linked to a domain. You must first create a group policy object.
What do you access to accomplish this task?
A.
Active Directory Users and Computers snap-in
B.
Security Configuration And Analysis snap-in
C.
Active Directory Domains and Trusts snap-in
D.
Active Directory Sites and Services snap-in
10 . While administering a Windows 2000 network, you and your co-workers decide to implement roaming user profiles for all users on the network. The network uses only Windows 2000 Server computers and Windows 2000 Professional client computers.
In addition to implementing the roaming user profiles, you have decided to implement home folders on the network for the users. When creating the home folders, which permission change is required?
A.
The permissions on the folder must be changed from Write Permissions for the Everyone group to Write Permissions for the Users group.
B.
The permissions on the folder must be changed from Write Permissions for the Users group to Write Permissions for the Everyone group.
C.
The permissions on the folder must be changed from Full Control for the Users group to Full Control for the Everyone group.
D.
The permissions on the folder must be changed from Full Control for the Everyone group to Full Control for the Users group.
11 . You are the administrator for a Windows 2000 network. The network is configured for Active Directory and Group Policies.
You want to implement auditing on the network. You have enabled access to Active Directory objects. You now need to enable auditing for specific Active Directory objects.
What must you access to enable these objects?
A.
Active Directory Sites and Services snap-in
B.
Active Directory Users and Computers snap-in
C.
Security Configuration and Analysis snap-in
D.
Event Viewer snap-in
12 . You must implement a 200-node network. You must divide the network into 4 subnets and each subnet must not exceed 60 nodes. How should you configure the IP addressing structure to allow for this configuration if the company's IP address is 194.194.194.0?
A.
194.194.194.0/26
B.
194.194.194.0/28
C.
194.194.194.0/27
D.
194.194.194.0/25
13 . Your company plans to establish a new Web site. This Web site will allow visitors to download various shareware programs from your FTP site. The network administrator will be responsible for managing the FTP traffic to the site.
Which optional component should you install?
A.
Windows Media Services
B.
IIS
C.
Remote Installation Services
D.
Remote Storage
14 . You are the administrator for a Windows 2000 network that uses Windows 2000 Server computers and Windows 2000 Professional client computers. The network is configured to use Active Directory and Group Policies.
You find out that one of the Windows 2000 Server computer's local group policy settings is incorrect according to your company's standards. The administrator before you changed the permissions for the local group policy. You want the permissions set back to the defaults.
Where will you access these permissions and how should the permissions be set?
A.
Use the WINNT\System directory, and set the permissions to:
Administrators = Read, Write, and Modify
SYSTEM = Full Control
B.
Use the WINNT\System32 directory, and set the permissions to:
Administrators = Read, Write, and Modify
SYSTEM = Full Control
Authenticated Users = Read, and List Folder Contents.
C.
Use the WINNT\System32\GroupPolicy directory, and set the permissions to:
Administrators = Full Control
SYSTEM = Full Control
Authenticated Users = Read and Execute, List Folder Contents, and Read.
D.
Use the WINNT\System directory, and set the permissions to:
Administrators = Full Control
SYSTEM = Read, Write, and Modify
Authenticated Users = Read and Execute, and List Folder Contents
15 . A Windows 2000 server print device fails and can no longer print successfully. You must print a specific document sent to the print device. The queue for the print device has 200 pending print jobs. How can you print the specific document?
A.
Redirect the single document to another print device
B.
Redirect all documents to a different print device
C.
Print the document to a file
D.
Delete and recreate the print device
16 . You add a printer to a Windows 2000 Server domain controller. This printer is intended for use only by the top ten executives in the company. They are all members of the Executives group, but there are 75 other executives that are also members of this group. The executives are also members of the Domain Users Group, the Everyone Group, and the Board Members group. The Board Members group contains the 20 board members of the company. You want to configure the printer so only these 10 members can access the printer. How can you perform this function?
A.
Clear all access to all groups and add the 10 executives to the printer's ACL with Print permissions assigned to each one of them.
B.
Allow Print permissions to the Executives group and deny access to the printer for all the other groups.
C.
Deny access to all groups and add the 10 executives to the printer's access control list (ACL) with Full Control permissions assigned to each one of them.
D.
Allow Full Control permission to the Executives group and deny access to the printer for all the other groups.
17 . You have recently been hired as one of the network administrators for a Windows 2000 network. The network uses Active Directory and Group Policies, and consists of all Windows 2000 Server computers and Windows 2000 Professional client computers.
You have been training for your new position with one of the administrators. While observing maintenance procedures, the administrator uses the utility Gpedit.msc.
Why did the administrator use this utility?
A.
To create a new domain GPO
B.
To edit the local GPO
C.
To create a new local GPO
D.
To edit the domain GPO
18 . During the installation of Windows 2000 Server, you receive an insufficient disk space error. There is a small amount of data on this disk that must not be erased, and the server's hardware must not be modified. How can you resolve this error?
A.
Install another hard drive
B.
Verify all hardware is properly detected and on the Hardware Compatibility List
C.
Create enough free space for the Windows 2000 Server installation on the target partition
D.
Format the partition
19 . You are administering a Windows 2000 network that uses Windows 2000 Server computers and Windows 2000 Professional client computers.
You need to make some configuration changes to the hardware profiles for one of the server computers.
What should you access to accomplish this task?
A.
Power Options in Control Panel
B.
System in Control Panel
C.
Add/Remove Hardware in Control Panel
D.
Network and Dial-Up Connections in Control Panel
20 . You must connect a satellite office to the main office network using the Internet. At the main office, you will connect to a Windows 2000 server using a Windows 2000 Professional computer from the satellite office. How should you make the connection using the most secure method over the Internet?
A.
Implement a VPN connection with the Point-to-Point Tunneling Protocol
B.
Implement a VPN connection with the Layer 2 Tunneling Protocol
C.
Implement a VPN connection with the PPTP protocol using IPSec Encapsulating Security payload Tunnel Mode
D.
Implement a VPN connection with the IP in IP (IP-IP) protocol
21 . Your Windows 2000 server has 2 IDE 15-GB hard drives in it. Each drive has 3 partitions on it. The system partition is the first partition on the first hard drive and it is replicated to the second partition on the second drive using a RAID level 1 configuration. The first hard drive fails and you must edit the Boot.ini file so the system partition uses the replication on the second disk. How should you configure the ARC path?
A.
multi(0)disk(0)rdisk(2)partition(3)\WINNT="Windows 2000 Server"
B.
multi(0)disk(0)rdisk(1)partition(3)\WINNT="Windows 2000 Server"
C.
multi(0)disk(0)rdisk(2)partition(2)\WINNT="Windows 2000 Server"
D.
multi(0)disk(0)rdisk(1)partition(2)\WINNT="Windows 2000 Server"
22 . You are configuring Group Policy for your Windows 2000 network. The network uses only Windows 2000 Server computers and Windows 2000 Professional client computers.
You want to create a group policy. You want the policy linked to a site. You must first create a group policy object (GPO).
How can you accomplish this task?
A.
Open the Active Directory Users and Computers snap-in. Select the Users node and open the Properties dialog box for Group Policy Creator Owners. Enter a name for the new GPO.
B.
Open the Active Directory Sites and Services snap-in. Select the site and open the Properties dialog box. Select the Group Policy tab and click New. Enter a name for the new GPO.
C.
Open the Active Directory Sites and Services snap-in. Select the site and open the Properties dialog box. Select the Object tab and enter the object name.
D.
Open the Active Directory Users and Computers snap-in. Select the site and open the Properties dialog box. Select the Group Policy tab and click New. Enter a name for the new GPO.
23 . You are the administrator for a Windows 2000 network that uses only Windows 2000 Server computers and Windows 2000 Professional client computers. Your company uses the Encrypted File System (EFS) to encrypt files and folders on the network.
You have just installed a new Windows 2000 Professional client computer for a new employee. You need to create a new file encryption certificate on the computer.
Using the Cipher command-line utility, which line will accomplish this task?
A.
Cipher /e
B.
Cipher /f
C.
Cipher /k
D.
Cipher /f /q
24 . You are configuring your Windows 2000 server and must configure certain information on a fault tolerant volume. You must store the entire Exchange database and all customer information so a single failed disk in the drive will not lose any information. The partitions in the drive are as follows:
C:\- 2-GB FAT RAID Level 1 partition
D:\- 6-GB NTFS RAID Level 5 partition
F:\- 2-GB FAT32 striped set
G:\- 13-GB FAT32 spanned volume
On which partition could you store the information if you needed to encrypt the files?
A.
G:
B.
D:
C.
C:
D.
F:
25 . You are the administrator for a Windows 2000 network. The network uses Terminal Services.
You have decided to deploy applications to the client computers from the domain controller. You have discovered that the original application installation package did not install all of the necessary components to the local disk. What do you need to use in deploying the application from the domain controller?
A.
target file
B.
transform file
C.
installation file
D.
initialization file
Test Name :
Test 5
Category :
Win2k Server
Number of Question :
25
Pass Score :
80
Test Result
Your Score :
Passing Score :
80
Result :
Copyright by
VanTuMinh
© 2007
